Skip to main content
Check out our virtual trade show happening now!

Legacy Inset Perimeter Light Assembly


Product discontinued effective 12/2020.

  • High-visiblity yellow cast aluminum body suitable for the harshest environments
  • Pre-wired for quick and easy installations

Product Details

This newly redesigned Inset perimeter light is the latest addition to the FEC Heliports line of high quality LED lights. Perimeter lights are one of the most important safety features on your helipad. They are used to mark and illuminate the FATO and TLOF as well as to help the pilot locate the pad and safely land during night operations and inclement weather conditions. The Inset Perimeter Light is used in place of an elevated helipad perimeter light at locations where the lights are frequently knocked down by aircraft and or maintenance vehicles. These lights are strong enough to drive over.

Standards & Certifications

  • Conforms to: UL 50E, UL1598
  • Certified to: CSA C22.2 #250.0, CSA C22.2 #94
  • Reference Guides: UK 1264, API, CAP 437, ICAO Annex 14, FAA 87, CAA

Electrical characteristics:

Operating voltage: AC: 120V-277V, 50/60Hz
DC: 12V-24V, 50/60Hz
Operating temperature: -13F to 122F (-25C to +50C)
Max power consumption (AC): 6 watts, .2 amps @ 120V
6 watts, .1 amps @ 277V
350mA constant current supply
Max power consumption (DC): 6 watts @ 12V
6 watts @ 24V
Operating LED Lifespan Rated at 50,000+ hours
Light Source Omni-directional LED Lamp
3x Osram OSLONTM SSL 150O LEDs
Average power consumption 3.5W
2"(50mm) diameter aluminum circuit
RoHS and 94VO compliant

Physical characteristics:

Light Fixture
Height 5 inches (127mm)
Outside Diameter 10 inches (254mm)
3 inches(76.2mm) in Depth
Inside Diameter 4 inches (101.6mm)
After installation the lens is 1/2 inch above grade (12.7mm)
Lens Tempered Glass
Casting 356 T6 Aluminum Alloy
Powder Coat SW NL YELLOW PYS8-C8289
Mounting Can
Height 6 5/8 inches (168.27mm)
Outside Diameter 11 inches 279.4mm
6 5/8 inches(168.275mm) in Depth
Inside Diameter 8 1/2 inches 215.9mm
Casting 356 T6 Aluminum Alloy

NVG characteristics (700 and 900 series):

Light Source 2 IR LEDs (850nm)
5.5W power consumption (@350mA)

All machining on the aluminum casting is done in house by FEC Heliports

Shipping weight w/o mounting can: 4lbs.
Shipping weight w/ mounting can: 10lbs.

Intertek ETL Listed

Product Downloads

back to top