Skip to main content

Pad-Star® DC Inset Semi-Flush L-810 Obstruction Light - 2nd Generation

Key Features

  • Release Date 12/2020. View 1st Generation
  • Hermetically sealed optical assembly to mitigate condensation
  • Infra-Red standard equipment on all Pad-Star series lighting
  • NVG Compatible
  • Best Warranty in the Industry - 10 year fixture/3 year electronics
  • Engineered and designed to be universally compatible with any existing heliport lighting system
  • Meets all current FAA, ICAO, CAP 437 requirements for light intensity and distribution
  • Mil-spec anodized cast aluminum body suitable for the harshest environments
  • Pre-wired for quick, easy install on any mounting surface
  • Can be driven by renewable energy sources
  • Low voltage, easy install on any mounting surface
  • Energy efficient, 12-24 volt DC power supply required
  • Light fixture interchangeable to any manufacturer’s 10-12” light base with adapter ring

Product Details

The new design of this Inset perimeter light is the latest addition to the FEC Heliports line of high quality LED lights. Perimeter lights are one of the most important safety features on your heliport. They are used to mark and illuminate the perimeter of your landing area (TLOF/FATO) to help the pilot locate the pad and safely land during night operations and inclement weather conditions. The inset light is used in place of an elevated heliport perimeter light at locations where the lights are frequently knocked down by aircraft and or maintenance vehicles. These lights are strong enough to drive over without damaging the light.

Certifications & Compliances

  • ETL Listed to UL2108
  • ETL Listed to UL1598 at -40⁰ c to +55⁰c
  • ETL Listed to CSA C22.2 NO. 250.0-08
  • FAA EB#87, L-860HR & HS
  • FAA AC 150/5390-2 (Latest Rev.), Heliports Design Guide
  • ICAO Annex 14, Volume II
  • UK CAP 437
  • UK CAP 1264

Electrical characteristics:

Operating Voltage: 120/277V 50/60Hz input
12/24 VDC Output via FEC PLC Controller
Operating Power: 6 Watts @ 0.350ma
Operating Temperature: -40⁰c to +55⁰c
Operating Lifespan: LED’s Rated at 50,000+ hours
Light Source: 1x Osram Visible LED
3x Osram IR Diodes

Physical characteristics:

Dimensions
Height Above Surface: 1.0" (25.4mm)
Body Diameter: 6 1/2" (165.1mm) to 4 3/4" (120.65mm)
Mounting Flange Diameter: 10" (254mm)
Mounting Pattern: 7 3/4" (196.85mm) BHC, 8 equally spaced 1/4" (6.35mm) holes, 82⁰ C-Sink
Materials
Flange Material: 6061-T6, QQ-A-200/8
Housing Material: 356-T6 Aluminum Alloy
Lens: Tempered Borosilicate
Hardware: 18-8 Stainless Steel
Finish: Hard Anodize per MIL-A-8625 Type II, Class 1
Light Base
Dimensions
Height: 6 5/8" (168.27mm)
Outside Diameter: 11" (279.4mm)
Inside Diameter: 8 1/2" (215.9mm)
Light Base Material: 356-T6 Aluminum Alloy

All machining on the aluminum casting is done in house by FEC Heliports

Shipping weight w/o light base: 4lbs.
Shipping weight w/ light base: 10lbs.

Intertek ETL Listed

Product Downloads

back to top