Skip to main content

Inset Perimeter Light Assembly

Key Features

  • Available in our Anodized or Powder Coated cast aluminum body to withstand the harshest environmental conditions
  • Pre-wired for quick and easy installations

Product Details

This newly redesigned Inset perimeter light is the latest addition to the FEC Heliports line of high quality LED lights. Perimeter lights are one of the most important safety features on your helipad. They are used to mark and illuminate the FATO and TLOF as well as to help the pilot locate the pad and safely land during night operations and inclement weather conditions. The Inset Perimeter Light is used in place of an elevated helipad perimeter light at locations where the lights are frequently knocked down by aircraft and or maintenance vehicles. These lights are strong enough to drive over.

Certification by ETL:

  • UL 50E

  • UL 1598

  • CSA C22.2 #250.0

  • CSA C22.2 #94

Reference Guides:

  • UK 1264

  • API

  • CAP 437

  • ICAO Annex 14

  • FAA 87

  • CAA

Electrical characteristics:

  • Operating voltage 120V-277V, 50/60Hz

  • 6 watts, .2 amps @ 120V

  • 6 watts, .1 amps @ 277V

  • Operating temperature:-13F to 122F (-25C to +50C)

  • Rated at 50,000 hours

Physical characteristics:

  • After installation the lens is 1/2 inch above grade (12.7mm)

  • Light Fixture Outside Diameter is 10 inches(254mm) by 3 inches(76.2mm) in Depth.

  • Mounting Can Outside Diameter is 11 inches(279.4mm) by 6 5/8 inches(168.275mm) in Depth.

  • Shipping weight w/ can: 10lbs.

  • Shipping weight w/o can: 4lbs.

Product Downloads

back to top