Pad-Star® DC Elevated Ground Mount L-810 Obstruction Light – 1st Generation
Discontinued SKU:
HP1982G
Key Features
Product Details
Specs
Downloads
Product Details
The new design of this Ground perimeter light is the latest addition to the FEC Heliports line of high quality LED lights. Perimeter and Obstruction lights are one of the most important safety features on your heliport. They are used to mark and illuminate the perimeter of your landing area (TLOF/FATO) to help the pilot locate the pad and safely land during night operations and inclement weather conditions.
Specs
Certifications & Compliances
- ETL Listed to UL2108
- ETL Listed to UL1598 at -40⁰ c to +55⁰c
- ETL Listed to CSA C22.2 NO. 250.0-08
- FAA EB#87, L-860HR & HS
- FAA AC 150/5390-2 (Latest Rev.), Heliports Design Guide
- ICAO Annex 14, Volume II
- UK CAP 437
- UK CAP 1264
Electrical characteristics:
| Operating Voltage: | 120/277V 50/60Hz input 12/24 VDC Output via FEC PLC Controller |
| Operating Power: | 6 Watts @ 0.350ma |
| Operating Temperature: | -40⁰c to +55⁰c |
| Operating Lifespan: | LED’s Rated at 50,000+ hours |
| Light Source: | 1x Osram Visible LED 3x Osram IR Diodes |
Physical characteristics:
| Dimensions | |
| Height Above Surface: | 4 1/4" (107.95mm) |
| Body Diameter: | 6 1/2" (165.1mm) |
| Mounting Flange: | 8" (203.2mm) |
| Mounting Pattern: | 7 1/6" (177.8mm) BHC, 4 equally spaced 5/16" holes |
| Materials | |
| Flange Material: | 6061-T6, QQ-A-200/8 |
| Housing Material: | 356-T6 Aluminum Alloy |
| Lens: | Tempered Borosilicate |
| Hardware: | 18-8 Stainless Steel |
| Finish: | Hard Anodize per MIL-A-8625 Type II, Class 1 |
All machining on the aluminum casting is done in house by FEC Heliports
Shipping weight: 6lbs.
Downloads
