This newly redesigned Pole Perimeter Light is the latest addition to the FEC Heliports line of high quality LED lights. Perimeter and Obstruction lights are one of the most important safety features on your heliport. They are used to mark and illuminate the FATO, TLOF, and Obstructions as well as to help the pilot locate the pad and safely land during night operations and inclement weather conditions.
Certifications & Compliances
- ETL Listed to UL1598 at -40⁰ c to +55⁰c
- ETL Listed to CSA C22.2 NO. 250.0-08
- FAA EB#87, L-860HR & HS
- FAA AC 150/5390-2 (Latest Rev.), Heliports Design Guide
- ICAO Annex 14, Volume II
- UK CAP 437
- UK CAP 1264
Electrical characteristics:
|
|
Operating Voltage: |
100-277 VAC, 50/60Hz |
Operating Power: |
6 Watts @ 0.350ma |
Operating Temperature: |
-40⁰c to +55⁰c |
Operating Lifespan: |
LED’s Rated at 50,000+ hours |
Light Source: |
1x Osram Visible LED 3x Osram IR Diodes |
Physical characteristics:
|
|
Dimensions |
|
Height Above Surface |
Overall height above surface will depend on pole length. Housing overall height is 5.0" (127mm) |
Lid Diameter: |
4 3/4" (120.65mm) |
Mounting Pattern: |
1”(25.4mm) NPT thread |
Materials |
|
Flange Material: |
6061-T6, QQ-A-200/8 |
Housing Material: |
356-T6 Aluminum Alloy |
Lens: |
Tempered Borosilicate |
Hardware: |
18-8 Stainless Steel |
Finish: |
Hard Anodize per MIL-A-8625 Type II, Class 1 |
All machining on the aluminum casting is done in house by FEC Heliports
Shipping weight: 6lbs.