The new design of this Pole perimeter light is the latest addition to the FEC Heliports line of high quality LED lights. Perimeter and Obstruction lights are one of the most important safety features on your heliport. They are used to mark and illuminate the FATO, TLOF, and Obstructions as well as to help the pilot locate the pad and safely land during night operations and inclement weather conditions.

Certifications & Compliances

• ETL Listed to UL2108
• ETL Listed to UL1598 at -40⁰ c to +55⁰c
• ETL Listed to CSA C22.2 NO. 250.0-08
• FAA EB#87, L-860HR & HS
• FAA AC 150/5390-2 (Latest Rev.), Heliports Design Guide
• ICAO Annex 14, Volume II
• UK CAP 437
• UK CAP 1264

Electrical characteristics:

Operating Voltage:	120/277V 50/60Hz input 12/24 VDC Output via FEC PLC Controller
Operating Power:	6 Watts @ 0.350ma
Operating Temperature:	-40⁰c to +55⁰c
Operating Lifespan:	LED’s Rated at 50,000+ hours
Light Source:	1x Osram Visible LED 3x Osram IR Diodes

Physical characteristics:

Dimensions
Height Above Surface	Overall height above surface will depend on pole length. Housing overall height is 5.0" (127mm)
Body Diameter:	6 1/2" (165.1mm)
Mounting Pattern:	1/2" NPT thread
Materials
Flange Material:	6061-T6, QQ-A-200/8
Housing Material:	356-T6 Aluminum Alloy
Lens:	Tempered Borosilicate
Hardware:	18-8 Stainless Steel
Finish:	Hard Anodize per MIL-A-8625 Type II, Class 1

All machining on the aluminum casting is done in house by FEC Heliports

Shipping weight: 6lbs.