Pad-Star® AC Inset Semi-Flush – 2nd Generation
Key Features
- Release Date 12/2020. View 1st Generation
- Hermetically sealed optical assembly to mitigate condensation
- Infra-Red standard equipment on all Pad-Star series lighting
- NVG Compatible
- Best Warranty in the Industry - 10 year fixture/3 year electronics
- Engineered and designed to be universally compatible with any existing heliport lighting system
- Meets all current FAA, ICAO, CAP 437 requirements for light intensity and distribution
- Mil-spec anodized cast aluminum body suitable for the harshest environments
- Pre-wired for quick, easy install on any mounting surface
- Wide input voltage
- Light fixture interchangeable to any manufacturer’s 10-12” light base with adapter ring
Product Details
Specs
Downloads
Product Details
The new design of this Inset perimeter light is the latest addition to the FEC Heliports line of high quality LED lights. Perimeter lights are one of the most important safety features on your heliport. They are used to mark and illuminate the perimeter of your landing area (TLOF/FATO) to help the pilot locate the pad and safely land during night operations and inclement weather conditions. The inset light is used in place of an elevated heliport perimeter light at locations where the lights are frequently knocked down by aircraft and or maintenance vehicles. These lights are strong enough to drive over without damaging the light.
Specs
Certifications & Compliances
- ETL Listed to UL1598 at -40⁰ c to +55⁰c
- ETL Listed to CSA C22.2 NO. 250.0-08
- FAA EB#87, L-860HR & HS
- FAA AC 150/5390-2 (Latest Rev.), Heliports Design Guide
- ICAO Annex 14, Volume II
- UK CAP 437
- UK CAP 1264
Electrical characteristics:
| Operating Voltage: | 100-277 VAC, 50/60Hz |
| Operating Power: | 6 Watts @ 0.350ma |
| Operating Temperature: | -40⁰c to +55⁰c |
| Operating Lifespan: | LED’s Rated at 50,000+ hours |
| Light Source: | 1x Osram Visible LED 3x Osram IR Diodes |
Physical characteristics:
| Dimensions | |
| Height Above Surface: | 1.0" (25.4mm) |
| Body Diameter: | 6 1/2" (165.1mm) to 4 3/4" (120.65mm) |
| Mounting Flange Diameter: | 10" (254mm) |
| Mounting Pattern: | 7 3/4" (196.85mm) BHC, 8 equally spaced 1/4" (6.35mm) holes, 82⁰ C-Sink |
| Materials | |
| Flange Material: | 6061-T6, QQ-A-200/8 |
| Housing Material: | 356-T6 Aluminum Alloy |
| Lens: | Tempered Borosilicate |
| Hardware: | 18-8 Stainless Steel |
| Finish: | Hard Anodize per MIL-A-8625 Type II, Class 1 |
| Light Base | |
| Dimensions | |
| Height: | 6 5/8" (168.27mm) |
| Outside Diameter: | 11" (279.4mm) |
| Inside Diameter: | 8 1/2" (215.9mm) |
| Light Base Material: | 356-T6 Aluminum Alloy |
All machining on the aluminum casting is done in house by FEC Heliports
Shipping weight w/o light base: 4lbs.
Shipping weight w/ light base: 10lbs.
Downloads
